Looking for:
Software Download.Required Update Procedure and Installation of Software Update Package |
Software update downloading update package. Online update failure on my HUAWEI phone/tablet
For each software update, a state message is created that contains the compliance state for the update. The state messages are sent in bulk to the management point and then to the site server, where the compliance state is inserted into the site database.
The compliance state for software updates is displayed in the Configuration Manager console. You can deploy and install software updates on computers that require the updates. The following sections provide information about the compliance states and describe the process for scanning for software updates compliance.
The following lists and describes each compliance state that is displayed in the Configuration Manager console for software updates. Specifies that the software update is applicable and required on the client computer. Any of the following conditions could be true when the software update state is Required :.
The software update was installed on the client computer. However, the most recent state message has not yet been inserted into the database on the site server. The client computer rescans for the update after the installation has finished. There might be a delay of up to two minutes before the client sends the updated state to the management point that then forwards the updated state to the site server. However, the software update installation requires a computer restart before the update is completed.
Specifies that the software update is not applicable on the client computer. Therefore, the software update is not required. Specifies that the software update is applicable on the client computer and that the client computer already has the software update installed. Specifies that the site server has not received a state message from the client computer, typically because one of the following:. The scan finished successfully on the client computer. However, the state message has not yet been processed on the site server, possibly because of a state message backlog.
The scan finished successfully on the client computer, but the state message has not been received from the child site.
The scan finished successfully on the client computer, but the state message file was corrupted in some way and could not be processed. When the software update point is installed and synchronized, a site-wide machine policy is created that informs client computers that Configuration Manager software updates was enabled for the site. When a client receives the machine policy, a compliance assessment scan is scheduled to start randomly within the next two hours. The WUA then connects to the WSUS server location that is listed in the local policy, retrieves the software updates metadata that has been synchronized on the WSUS server, and scans the client computer for the updates.
A Software Updates Client Agent process detects that the scan for compliance has finished, and it creates state messages for each software update that changed in compliance state after the last scan.
The state messages are sent to the management point in bulk every 15 minutes. The management point then forwards the state messages to the site server, where the state messages are inserted into the site server database. After the initial scan for software updates compliance, the scan is started at the configured scan schedule. However, if the client has scanned for software updates compliance in the time frame indicated by the Time to Live TTL value, the client uses the software updates metadata that is stored locally.
When the last scan is outside the TTL, the client must connect to WSUS running on the software update point and update the software updates metadata stored on the client. Including the scan schedule, the scan for software updates compliance can start in the following ways:. Software updates scan schedule : The scan for software updates compliance starts at the configured scan schedule that is configured in the Software Updates Client Agent settings.
For more information about how to configure the Software Updates client settings, see software updates client settings. Deployment reevaluation schedule : The deployment evaluation and scan for software updates compliance starts at the configured deployment reevaluation schedule, which is configured in the Software Updates Client Agent settings.
For more information about the Software Updates client settings, see software updates client settings. Prior to downloading update files : When a client computer receives an assignment policy for a new required deployment, the Software Updates Client Agent downloads the software update files to the local client cache.
Before downloading the software update files, the client agent starts a scan to verify that the software update is still required. Prior to software update installation : Just before the software update installation, the Software Updates Client Agent starts a scan to verify that the software updates are still required.
After software update installation : Just after a software update installation is complete, the Software Updates Client Agent starts a scan to verify that the software updates are no longer required and creates a new state message that states that the software update is installed. When the installation has finished, but a restart is necessary, the state message indicates that the client computer is pending a restart. After system restart : When a client computer is pending a system restart for the software update installation to finish, the Software Updates Client Agent starts a scan after the restart to verify that the software update is no longer required and creates a state message that states that the software update is installed.
The software updates metadata that is required for the scan for software updates compliance is stored on the local client computer, and by default, is relevant for up to 24 hours. Not sure exactly why this happens, but the following seems to resolve the issue in our environment without having to uninstall the client:.
Shane Krummen Thank you very much. The setting was set. Once i changed the setting to No, I was able to install patches on Win 10 machines. I am not sure why this would cause the issue only on Win 10 machines not on Win 8.
Can you provide the client version in use? This was an issue that we discovered and fixed prior to GA. The workaround noted should not be needed if clients are running an updated version of the client.
I guess I should also inquire about your path to The Hash attribute is empty. If you have some time and don't mind, please send-a-frown via the CM console with as much detail as possible.
Please note the Win10 version s in use as well as whether or not you have the site configured to sync express files. Download both full files for all approved updates and express installation files for Windows 10 on the Update Files tab of the SUP properties. I applied what you did and add; the following steps as well. Products 67 Special Topics 42 Video Hub Most Active Hubs Microsoft Teams. Security, Compliance and Identity. Selecting a language below will dynamically change the complete page content to that language.
You have not selected any file s to download. A download manager is recommended for downloading multiple files. Would you like to install the Microsoft Download Manager? Generally, a download manager enables downloading of large files or multiples files in one session. Many web browsers, such as Internet Explorer 9, include a download manager. Stand-alone download managers also are available, including the Microsoft Download Manager.
The Microsoft Download Manager solves these potential problems. It gives you the ability to download multiple files at one time and download large files quickly and reliably.
It also allows you to suspend active downloads and resume downloads that have failed. Microsoft Download Manager is free and available for download now.
KB Articles: KB Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn't match my screen. Incorrect instructions. Too technical. Not enough information.
No comments:
Post a Comment